Originally Posted by mrv8outboard (Post 4358788)

Ah yes, now I see what shaft you are describing.

Originally Posted by motor (Post 4358806)

didn't you say you didn't have a pilot bearing on yours .If you don't ?

Originally Posted by payuppsucker (Post 4358810)

Here's one place. Send them one of your old ones and they'll build one that'll take whatever power you put to it. They do steel, aluminium, carbon fiber. Fast turn around times too. Wiles Driveshafts 3775 US-79 Scenic, Paris, TN 38242
(731) 333-3264

Originally Posted by ezstriper (Post 4358963)

maybe ck with some custom drive shaft shops that build race car shafts, they may be able to come up with something..

Originally Posted by jdflchr (Post 4358966)

Thank you, I'll call them today!

Originally Posted by JMPH (Post 4358529)

In the forward engine when your running scx drives ,the shaft you are talking in the week link , l had two of them go, they where twisted ,check the pilot bushing in the end of the crank, Brian forehand says they go all the time when running scx on a high horpower motor.