Engine rebuilders in the Chesapeake region.
 

I have 500 EFIs with over 500 hours on them. I am looking for recommendations for local engine builders that someone has used and had either good or bad dealings with. Yes bad dealings so I know to stay away from and good results to maybe check them out further. I can pull the engines to maybe help out thier shops schedule.

Call Tony @ CMS 410 335 2226 try calling early in the morning. Otherwise leave a message and he will call you back. He's very good a little slow on return time but he's honest about time frame. In the end you will be happy.

Mark Rinda at MER performance is out that way

If you consider 8 hours drive out that way.

Dont forget Dave at MDG.

+1 = Good at 410-956-5381

+2 for Tony at CMS Racing, he did the motor in mine

Going to check out each one of them thanks guys

Ok I think I have found a rebuilder. So my next question is do I pressure test the headers and reuse them or buy new ones?

What does your rebuilder say?