hylift johnson lifters.
11-23-2018, 09:24 AM
#23
Registered
iTrader: (3)
I remember when a bunch of madera cams were showing up to the party with alot of lobe tracking on them with not alot of time on them.
there were alot of guys who ran those madera (cam motion) cores, prior without issues. It seemed like most of the ones where there was lobe issues, also had the johnson lifters riding on them. Prior to that, it was morel lifters bob sold with his cams.
i wonder if the .700 wheel was responsible for some of this lobe tracking?
there were alot of guys who ran those madera (cam motion) cores, prior without issues. It seemed like most of the ones where there was lobe issues, also had the johnson lifters riding on them. Prior to that, it was morel lifters bob sold with his cams.
i wonder if the .700 wheel was responsible for some of this lobe tracking?
11-23-2018, 12:30 PM
#24
Fast Singles Club
Gold Member
iTrader: (8)
I remember when a bunch of madera cams were showing up to the party with alot of lobe tracking on them with not alot of time on them.
there were alot of guys who ran those madera (cam motion) cores, prior without issues. It seemed like most of the ones where there was lobe issues, also had the johnson lifters riding on them. Prior to that, it was morel lifters bob sold with his cams.
i wonder if the .700 wheel was responsible for some of this lobe tracking?
there were alot of guys who ran those madera (cam motion) cores, prior without issues. It seemed like most of the ones where there was lobe issues, also had the johnson lifters riding on them. Prior to that, it was morel lifters bob sold with his cams.
i wonder if the .700 wheel was responsible for some of this lobe tracking?
11-23-2018, 03:54 PM
#27
Registered
iTrader: (1)
https://johnsonlifters.com.tempdomai...tributors.aspx
11-23-2018, 04:47 PM
#28
Registered
iTrader: (1)
A couple years ago there was a show that went into a nascar engine shop and the pride and Joy was some million dollar machine that’s sole purpose was to X-ray lifters before assembly. I forget the important numbers and rejection rate but I think it was something like 1 out of 10 was flawed with hair line cracks and such. I assume they get the best of the best and lifter failure was a big issue for them.
11-23-2018, 10:03 PM
#29
Registered
July of 2016 this Johnson Hylift took my engine out in Milwaukee.
Same day as the NIOC run.. Several of you saw me getting towed in.
Same day as the NIOC run.. Several of you saw me getting towed in.
Last edited by Revd Up; 11-23-2018 at 10:07 PM.
11-23-2018, 10:18 PM
#30
Registered
Opps wrong picture. Darn Photobucket.
BTW that picture is of Jay Turner Nitro Harley Champ
BTW that picture is of Jay Turner Nitro Harley Champ
Last edited by Revd Up; 11-23-2018 at 10:44 PM.
