Thru hull fitting for trim cables.
 

The stock cable holes are cut at a 45 deg angle and then go down to the drives. They just have a plastic cover and are sealed with whatever you choose.

Covers are black plastic like the ones in the picture.

Does anybody know of a source that I can get a SS fitting similar to what the trim tabs use? These just seem so cheap and even though I still use sealer it would be nice to have a little better seal and holder.

[ATTACH=CONFIG]549891[/ATTACH]

Here you go buddy

http://www.ebay.com/itm/Cable-Grip-A...xWBr~e&vxp=mtr

Thanks MT!
That will work,,, region rats rule.

Thats a good price. I think merc gets like 120 for them

Wildman, I think I have 2 of those in my garage attic . I will check tomorrow . If I have them still you can have them .

What else is in the attic :coolcowboy:

Not much left up there . Misc gauges, throttles , trim pumps, trans/power steering coolers, bravo trim cylinders, bravo inner transome plates, trim indicator actuators...... Misc stuff like that and enough parts to build a 69 camaro and a few motorcycles lol
You have my number , let me know if you need anything

If you want the knock off ones Eddie marine sells them for 42$ each.

http://eddiemarine.com/steering-and-...ies/cable-seal

Cool Billy let me know.

Thanks.

Are these things for use below the waterline or very close to it? My trim cables just have clam shell covers.