Offshoreonly.com
Page 3 of 25
1
2
3
4
5
13
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Engine Quest Head work results (https://www.offshoreonly.com/forums/general-q/335242-engine-quest-head-work-results.html)

Panther 03-08-2016 08:44 AM
Thanks for sharing

endeavor1 03-08-2016 08:57 AM
Hell of a nice write up. Complete, accurate and not biased. Way to go

articfriends 03-08-2016 10:30 AM
Originally Posted by MER Performance (Post 4412986)
I must say; I'm pretty impressed with those numbers.... Alex; told me last week, that was a decent head out of the box....
Cast iron port work, not very fun at all....
I agree, the heads responded well to the work which they should, obviously the head porter is talented. I am also impressed by how good the base numbers start out as!!
Joe, thanks for taking the time to post up your info

MILD THUNDER 03-08-2016 10:57 AM
Originally Posted by articfriends (Post 4413090)
I agree, the heads responded well to the work which they should, obviously the head porter is talented. I am also impressed by how good the base numbers start out as!!
Joe, thanks for taking the time to post up your info

Its cool to try a new product sometimes . Thanks for posting up all the good info yourself smitty

murfman 03-08-2016 02:22 PM
Those EQ heads are no joke, The ones they make for the Mopar Magnum series A motors are killer as well, and only 300$ a piece bare. I have not heard anything negative about them for any application from anyone.

F-2 Speedy 03-08-2016 02:46 PM
Do they make the same casting in aluminum ?

SB 03-08-2016 02:53 PM
Originally Posted by 33outlawsst (Post 4413179)
Do they make the same casting in aluminum ?
RHS dropped the cast iron heads, Engine Quest picked them up. So...if you want aluminum then you can still get the RHS aluminums. For the price being similar to other Aluminums, you have more companies to choose from. Back to cast iron, you just have World Products, Dart, and Engine Quest. The last two being the better.

MILD THUNDER 03-08-2016 04:14 PM
Originally Posted by SB (Post 4413185)
RHS dropped the cast iron heads, Engine Quest picked them up. So...if you want aluminum then you can still get the RHS aluminums. For the price being similar to other Aluminums, you have more companies to choose from. Back to cast iron, you just have World Products, Dart, and Engine Quest. The last two being the better.
Right on. The aluminum RHS heads, are available from RHS, which is owned by comp cams now. I do not know where they are being cast. I have heard the quality is questionable.

The Engine Quest IRON heads, are still being cast in the same Foundry in New Zealand, as they were back when they were Pro Topline, and RHS.

horsepower1 03-08-2016 06:41 PM
Originally Posted by MILD THUNDER (Post 4413211)
Right on. The aluminum RHS heads, are available from RHS, which is owned by comp cams now. I do not know where they are being cast. I have heard the quality is questionable.

The Engine Quest IRON heads, are still being cast in the same Foundry in New Zealand, as they were back when they were Pro Topline, and RHS.
China.

horsepower1 03-08-2016 07:04 PM
See anything wrong with this picture?

https://scontent-atl3-1.xx.fbcdn.net...a4&oe=5793FC4C


All times are GMT -5. The time now is 11:06 AM.
Page 3 of 25
1
2
3
4
5
13
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.