Offshoreonly.com
Page 8 of 25
« First
6
7
8
9
10
18
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Engine Quest Head work results (https://www.offshoreonly.com/forums/general-q/335242-engine-quest-head-work-results.html)

articfriends 04-08-2016 01:25 PM
Ran into same thing on my AFRs and KRE Pontiac heads, one of the 2 i had to even reduce the OD of a good snapon socket to get it in plug recess

Panther 04-08-2016 02:48 PM
Originally Posted by MILD THUNDER (Post 4426298)
Strange. I just tried two different spark plug sockets, a craftsman and off brand, both fit fine.
Mine must be machined differently. Two heads the regular socket went in fine but a little tight. The other two heads were a little trying.

Originally Posted by articfriends (Post 4426311)
Ran into same thing on my AFRs and KRE Pontiac heads, one of the 2 i had to even reduce the OD of a good snapon socket to get it in plug recess
My AFR's go in ok for me.

Weird!!

Panther 04-21-2016 08:29 PM
The EQ's have a nice crackle...
https://youtu.be/2FlgQjgyc5Q

MILD THUNDER 04-21-2016 08:33 PM
Originally Posted by Panther (Post 4431102)
The EQ's have a nice crackle...
https://youtu.be/2FlgQjgyc5Q
Sounds good !

Gimme Fuel 04-22-2016 08:23 AM
Originally Posted by Panther (Post 4431102)
The EQ's have a nice crackle...
https://youtu.be/2FlgQjgyc5Q
Sounds real nice! What cam and expected HP?

Panther 04-22-2016 08:52 AM
Originally Posted by Gimme Fuel (Post 4431262)
Sounds real nice! What cam and expected HP?
268741, 540/570hp.

MILD THUNDER 04-22-2016 08:53 AM
You gonna dyno it Frank?

Panther 04-22-2016 08:54 AM
Originally Posted by MILD THUNDER (Post 4431274)
You gonna dyno it Frank?
Planning on it.

MILD THUNDER 04-22-2016 08:58 AM
Originally Posted by Panther (Post 4431276)
Planning on it.
Cool. Mine should be ready for the dyno pretty soon.

F-2 Speedy 04-22-2016 09:41 AM
Originally Posted by articfriends (Post 4426311)
Ran into same thing on my AFRs and KRE Pontiac heads, one of the 2 i had to even reduce the OD of a good snapon socket to get it in plug recess
# 5 hole on the starboard engine is real tight, had to use a thin wall 5/8 socket to get it out ( AFR )


All times are GMT -5. The time now is 02:08 AM.
Page 8 of 25
« First
6
7
8
9
10
18
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.