Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Rant on Dealer and much needed tranny help (https://www.offshoreonly.com/forums/general-q/335619-rant-dealer-much-needed-tranny-help.html)

TruxtonFox 03-18-2016 06:09 PM

Rant on Dealer and much needed tranny help
 
Called a week ago to the nearest merc dealer 45 miles away and asked if they repaired merctrans 2 transmissions. Responded enthusiastically with a yes we do. Left work early, drove the tranny over there just to be met by a gentleman who informed me they could only order parts for them and not repair them. After several seconds giving him the are you f$@?/!$ kidding me stare I asked him if he would come look at what I had in the back of the truck. After viewing the busted end and bearing flopping around, he tells me that those parts are probably obsolete and that he doesn't have anyone that can fix them!!!!! Bout lost my sh!t......needless to say I need some guidance on what these parts are. End of transmission away from engine side with bearing and some kind of steel collar with bolts holding on. Bearing is good except it's flopping around, collar is broken and has liquid gasket to hold together. Any source on parts and rebuild advice is much appreciated

getrdunn 03-18-2016 06:20 PM

Do yourself a favor and call kcmarine and or do a google search. They are experts on the trannies and extremely helpful. Keep in mind they also sell a New very improved oil cooler that extends the life of those trans.


http://www.kcmarinetr.com/Default.aspx

TruxtonFox 03-18-2016 06:22 PM

Where are they out of

getrdunn 03-18-2016 06:23 PM

I put a link in other post

TruxtonFox 03-18-2016 06:24 PM

Found it, thanks

getrdunn 03-18-2016 06:28 PM

People ship trans to them all the time if it's something you can't order parts for and do it yourself. They are the probably the only reputable place I'd have service primarily cause their considered old school and newer age mechanics don't know much about them. I have them also.

TruxtonFox 03-18-2016 06:31 PM

And I totally get that, I deal with it on a daily basis, but don't have your head so far up your a$$ that you just smile and nod without knowing what the customer is trying to accomplish. Not backlashing you, I really do appreciate the link. I'll be in touch with them on monday


All times are GMT -5. The time now is 06:10 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.