Steering wheel adapter
Trying to attach my old steering wheel to my new hyd helm with the standard 3/4" tapered/keyed shaft..
The spacing between the 3 steering wheel mounting bolts is 1.5".. I have found some 3 hole adapters but they all have 1.75" spacing. Does anybody make the adapter I need? |
After a bit of digging, I've discovered there are 2 ways to measure the distance for the 3 steering wheel bolts:
Method 1: Measure from the center of one bolt hole to the center of another bolt hole (this is what I did). Method 2: Is the diameter of an imaginary circle centered on the steering shaft. The circle cuts thru the center of the 3 bolt holes. On my steering wheel, the imaginary circle diameter is 1 3/4". From bolt hole to bolt hole, the distance is just a hair over 1 1/2". With this in mind, it appears the adapter is not so rare after all. :party-smiley-020: |
All times are GMT -5. The time now is 10:11 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.