Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Drive shower length and cavitation. (https://www.offshoreonly.com/forums/general-q/336421-drive-shower-length-cavitation.html)

1BIGJIM 04-15-2016 07:43 AM

Drive shower length and cavitation.
 
1 Attachment(s)
My drive showers extend down 1 1/4 inches. They were this way when I purchased boat. I saw a thread a while back with recommended length. I experience cavitation coming on plane if I give it to much throttle.

SB 04-15-2016 08:14 AM

Yeh, that's too far. I had one down that far and would cavitate the prop enough to blow it out in mid 60's mph.

You can usually run them right up to the cavitation plate.

Griff 04-15-2016 12:45 PM

I'd cut off about 1/2"

Baja Rooster 04-15-2016 12:53 PM

I had the same problem and slash cut the tube pretty close to the plate. It flows plenty as there's no shortage of water under the plate.


All times are GMT -5. The time now is 12:25 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.