Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   replacing cap and rotor - ignition module ? (https://www.offshoreonly.com/forums/general-q/336436-replacing-cap-rotor-ignition-module.html)

jponfrank 04-15-2016 04:51 PM
replacing cap and rotor - ignition module ?
 
Im replacing the cap and rotor on my 1995 502 efi. The ignition module looks a little shabby so I want to replace it. Its a 8 pin module. The number on top says 369 1k12 GM. On the bottom 369a 7900-01. Singapore. My question is what brand or part number can I replace it with. Any info would be appricated . Thank You

SB 04-15-2016 05:10 PM
Delco 1965A

Usually cheaper on Amazon, than local.

Make sure you get good heatsink paste. They usually don't come with the module and good luck getting real stuff locally. If anyone carries it, it will be dielectric grease disguised as heat sink paste.

They sell Arctic Silver heatsink paste on Amazon too.

jponfrank 04-15-2016 05:16 PM
Perfect,thats what I was looking for. Thank You

Black Baja 04-16-2016 12:49 AM
Originally Posted by SB (Post 4428912)
Delco 1965A

Usually cheaper on Amazon, than local.

Make sure you get good heatsink paste. They usually don't come with the module and good luck getting real stuff locally. If anyone carries it, it will be dielectric grease disguised as heat sink paste.

They sell Arctic Silver heatsink paste on Amazon too.
It's actually called heat transfer compound. We get it locally from Grainger. Nobody carries the stuff or even knows what it is.


All times are GMT -5. The time now is 03:57 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.