Offshoreonly.com - 500EFI cam, what valve springs

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 500EFI cam, what valve springs (https://www.offshoreonly.com/forums/general-q/336817-500efi-cam-what-valve-springs.html)

ezstriper

04-29-2016 05:52 AM

Quote:

Originally Posted by picklenjim (Post 4433679)

That wouldn't correct a pushrod length issue.

no, the new studs only make adjusting the valves doable, you still to ck for the correct pushrod length

slimscheck

04-29-2016 07:26 AM

I understand now. Sorry for that dumb comment

Panther

04-29-2016 09:41 AM

get rid of the stock pushrods either way. You'll need to switch to studs, add guide plates because the holes are smaller in the ones you have and 1 piece pushrods along with the taller Morel 5475 lifters to account for higher lift.

All times are GMT -5. The time now is 12:21 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page