1 1/4 ID hose
 

Skip stupid ad...

Trying to find some 1 1/4" ID hose to go from my water inlet to the seawater pump to the oil cooler.. Wonder what y'all are using ?


Tried hardware store. Home depot, tractor supply, and a local plumbing supply .. Nothing...



THANKS !


Doug

Sierra makes the hose, you can order online at a number of places, like WestMarine.com, WholesaleMarine.com.

Just bought mine from ebasicpower.com
P/n SIE116-250-1140 $5.95/ft. Don't forget the new clamps also P/n IDE6720-5 $1.54 EA.
This is the good blue stripe wire re-enforced stuff and shipping is flat $ 12.00.

Most boat stores will have it. Be sure you use a hard wall hose.

I bought it at napa last time I needed it.

I got mine at CP Perf at $9ff and a reach around, but it's super good stuff.

http://www.cpperformance.com/p-32-1-...ater-hose.aspx

Yep just like picklenjim said make sure its hard wall....not the cheap braided reinforced clear junk...it may be able to hold pressure back but nothing keeps it from collapsing when its trying to suck more water then whats coming in!! Been there...overheated a motor once running it on a garden hose once too! LOL :D

Most industrial hose places have this stuff for very cheap. black hard wall with a metal coil in it for suction

Same stuff CP sells for 9 bucks a foot. Here's a 12.5 FT roll of it.

http://www.ebay.com/itm/Marine-Shiel...xUgi0w&vxp=mtr

Or the Gates version (same stuff). This is also for a 12.5FT roll. I've ordered this product several times now. The price is great.

http://www.truckpartswarehouseonline...T250-1144.html