Compare .200" 's . That will show more within that too, along with IVC and EVO. Assuming you can look up the .200" from Cam Motions lobe catalog.

I know the cam cards supplied only show valve timing events at .050, and duration at .050, and lift of course. Less info than you get when you buy an off the shelf crane cam. So very hard to decipher much about the cam lobe

I understand that. Valve opening / closing events can be figured out easy enough. Can you find lobes in Cam Motions masters and get the ,200 #'s

yes 241/[email protected], 681/663 lift, on a 112.

I don't have, nor can I find their lobe catalog. I have comp and cranes master lobes, but can't find anything that has a 681 lift, .400 lobe with 241* duration. Couldnt find anything from Lunati, Howards, Erson, or crower, that has a .400 lobe in a 241* lobe either. They seem to just not go there.

Comp Cams has a .396/.673/247 in their HUC lobe list which is pretty close to his exhaust lobe. They also have a .243 which is a smidgen smaller (.392).

Bullet also has a 238/.400 lobe

And a 240/.4030 lobe

And a 242/.400 lobe for Bullet

Cam Motion has .400 lobes listed here; http://www.cammotion.com/lobe-list.php

they offer 236 to 274 in .400

These ?