Offshoreonly.com - Alignment tool dementions

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Alignment tool dementions (https://www.offshoreonly.com/forums/general-q/34008-alignment-tool-dementions.html)

Kanookstr

09-30-2002 07:10 PM

Alignment tool dementions

Does anyone have the dementions for the mercruiser bravo 1 alignment tool??I have a friend looking for a machinest project to play around with. It's not a big project, but I'll get an alignment tool for free out of it.:D:D:D

There was a post way back when, and someone had a picture and dementions of it. but when I do a search, it doesn't come up.
thanks

doug hess

09-30-2002 10:06 PM

The reference below has the dimensions and sketch.

http://www.donzi.net/cgi-bin/ultimat...=003649#000004

28Eliminator

09-30-2002 11:59 PM

Kanookstr, I have one that I could messure up for you.
Doug's messurements take care of the dimensions, now you just need the lengths of each section. It should be fairly easy to do.

FindMe

10-01-2002 03:13 AM

I don't have the dimentions, but a picture is worth a 1000 words, with the right info....
Good luck..

http://home.attbi.com/~fordhater/align1.JPG
http://home.attbi.com/~fordhater/align2.JPG

Kanookstr

10-02-2002 10:29 AM

Thanks for the info guys, That schematic was perfect Doug.

FindMe

10-02-2002 07:25 PM

Heres one thats revised and a little better.... Good luck!

http://home.attbi.com/~fordhater/odrivetool.JPG

Kanookstr

10-03-2002 09:34 AM

Thats perfect Findme. Thanks

All times are GMT -5. The time now is 02:38 PM.