Imco riser gaskets
I have to replace my Imco riser gaskets. Do I install them dry or use some form of gasket sealer. I have some Indian Head laying around. For the younger guys,Indian Head sealant was the way to go back in the day. Thanks Joe
|
I did mine dry, no problems so far
|
when I had IMCO the joint was dry, so there was no reason.
I guess I'm old, I have indian head sealer. O'Riely's still sells it:drink: |
Imco manifold to riser is a wet joint.
Install the gaskets dry |
Originally Posted by 1BIGJIM
(Post 4469940)
when I had IMCO the joint was dry, so there was no reason.
I guess I'm old, I have indian head sealer. O'Riely's still sells it:drink: |
I always use sealer around water ports. Head gaskets included. Never had a failure. Even when re-used...
|
Ha ! I knew some guys would know what Indian Head was. Thanks Guys.
|
All times are GMT -5. The time now is 10:00 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.