Offshoreonly.com - AFR 325 flow sheets.... anyone ever flow these heads?

Page 51 of 80

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - AFR 325 flow sheets.... anyone ever flow these heads? (https://www.offshoreonly.com/forums/general-q/340844-afr-325-flow-sheets-anyone-ever-flow-these-heads.html)

mike tkach

01-28-2017 05:26 PM

seems like a lot of cam,you decided to go with solid roller.

Eliminated572

01-28-2017 06:06 PM

Holy duration.... what RPM you going to run at now?

Eliminated572

01-28-2017 06:09 PM

Quote:

Originally Posted by Full Force (Post 4523804)

Got cams [ATTACH=CONFIG]564198[/ATTACH]

Appears you went with Bob again for the cams? Or did you go direct to cam motion?

MILD THUNDER

01-28-2017 06:31 PM

Quote:

Originally Posted by Eliminated572 (Post 4523852)

Holy duration.... what RPM you going to run at now?

6800-7000.

He's going to bolt some 17P Mirage plus on it.

getrdunn

01-28-2017 08:06 PM

Quote:

Originally Posted by Full Force (Post 4523804)

Got cams [ATTACH=CONFIG]564198[/ATTACH]

Tell me your fken with us. Omg

endeavour32

01-28-2017 08:07 PM

Quote:

Originally Posted by Full Force (Post 4523804)

Got cams [ATTACH=CONFIG]564198[/ATTACH]

Is that a joke? I hope you have 100% dry pipes and plan to go even slower than before!

getrdunn

01-28-2017 08:12 PM

I'd bet he's messing with us just for chits and grins. Maybe he traded in 540's for some 632's

endeavour32

01-28-2017 08:19 PM

okay this has to be a joke- It's spec'd for 1.6 rockers

abones

01-28-2017 08:26 PM

Looks to me like a good Cam for a high rpm Ford motor!! Tim I know you like high reving fords..........

getrdunn

01-28-2017 08:35 PM

Quote:

Originally Posted by abones (Post 4523898)

Looks to me like a good Cam for a high rpm Ford motor!! Tim I know you like high reving fords..........

pulling engines on boat this weekend. Was going to yank today but I took my times and carefully went through everything and only a bolt or two before lift off in morning. Plus I have to open shop door and pull boat ahead about 8 feet to line up under I beam. Wasn't exactly warm today.

All times are GMT -5. The time now is 03:10 AM.

Page 51 of 80

« First

Last »

Show 40 post(s) from this thread on one page