![]() |
Maybe if he spun them in , it would carry the nose a bit and kill the chine walk . Or it might get worse ??
|
I know a ex Fountain race driver who once said all padded bottom deep V's will chine walk (if the driver doesn't stop it) and hull length is the main factor determining what speed it happens. The longer the boat, the higher the speed it starts to walk. He went on to say that chine walk is the drivers inability to balance the boat once it's on the pad.
|
Originally Posted by mcprodesign
(Post 4482156)
Naw just a 27 that chine walked a bit and my 38 that only chine walks when somethings wrong . I'm only trying to give all i know . Did all the 29's chine walk ?
|
I hit chine walk in my Velocity about 85. I talked to Steve Stepp and he said driving through chine walk is like driving your car on ice, you turn into it with small quick corrections.
|
Just to make you feel better, anyone can have problems with high speed boat handling no matter how experienced you are or how much you spend....
‘That boat was set to do 70 knots, but we could never get it to steer over 66 knots – as soon as it got to 65, 66 knots, it would either spin out to the right or the left. It was a massive spin-out, like being in a WaveRunner. We never ran that boat over 90 per cent power.’ (John Staluppi talking about his 42m superyacht 'The World Is Not Enough') He then continued to say.... "Imagine what it’s like to wipe out in a 42m superyacht at just short of 70 knots. Staluppi admits it was ‘Very scary’. But even short of maximum power, The World Is Not Enough is a very impressive motor yacht" source: http://johnstaluppi.com/john-staluppi-yachts.html If he had trouble getting it right, I guess it can happen to anyone.:) RR |
Originally Posted by ThisIsLivin
(Post 4482728)
I hit chine walk in my Velocity about 85. I talked to Steve Stepp and he said driving through chine walk is like driving your car on ice, you turn into it with small quick corrections.
|
Here is a hydrostream set up perfectly so he needs very little countersteer to get to speed. Watch closely just after 1:30 and you will see him chop the wheel like i was trying to explain. Sometimes if the boat is not right you will have to rapidly do the steering wheel chop back and fourth. I had a 17 ' switzer with a 235 on it that was almost impossible to run because it was nasty chinewalking . I had a 18' with a 200 that was not as bad but if you let off the throttle entirely, it would flop on to the left side . Thats how you get through a chinwalk. Dont let off quick if you cant make it because that might make you crash :)
https://youtu.be/8wmky9SuaJg https://youtu.be/8wmky9SuaJg |
|
Here you see a ol 29. Very very little chinewalking . Requires a very small amount if countersteer. But watch close. On a small scale. This is how you do it . Good luck! I still say work on set up though . Chad
https://youtu.be/IjwQ28sWGpI |
| All times are GMT -5. The time now is 01:43 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.