Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   525 Edelbrock head (https://www.offshoreonly.com/forums/general-q/341390-525-edelbrock-head.html)

SB 09-22-2016 09:56 PM
33outlaw, if you don'thave the 525exhaust, then you can use any head and use and performance bbc exhaust.

If you keep the 525 heads, you can get the Stainless Marine 525 conversion exhaust to keep it cheaper than being stuck buying the 525 CMI's.

sutphen 30 09-22-2016 10:09 PM
Originally Posted by SB (Post 4484243)
33outlaw, if you don'thave the 525exhaust, then you can use any head and use and performance bbc exhaust.

If you keep the 525 heads, you can get the Stainless Marine 525 conversion exhaust to keep it cheaper than being stuck buying the 525 CMI's.
or drill and tap a few holes.

F-2 Speedy 09-23-2016 07:21 AM
Originally Posted by SB (Post 4484243)
33outlaw, if you don'thave the 525exhaust, then you can use any head and use and performance bbc exhaust.

If you keep the 525 heads, you can get the Stainless Marine 525 conversion exhaust to keep it cheaper than being stuck buying the 525 CMI's.
I got the exhaust with the boat, CMI big tube sweepers, tails and mufflers, cool collar and drilled for both bolt patterns

F-2 Speedy 09-23-2016 07:48 AM
I got a great deal on these long blocks, I was just wondering if the Edelbrock head would support 600 ponies, I don't need big power to make this boat run, its documented with 500hp a side @ 87mph,


All times are GMT -5. The time now is 07:06 AM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.