|
I think I like those....where can I get them?
Originally Posted by SB
(Post 4484492)
http://www.diamondperformanceparts.c...roductid=16797
These let you bump them with side, top, bottom of finger , hand, etc,etc Much easier to do by feel when schit hits the fan vs regular rockers. Regular rocker switches force you to push and hold. I use these for tabs. Drive trim is on throttle as are most. |
Originally Posted by turbo rr
(Post 4484574)
I think I like those....where can I get them?
http://www.diamondperformanceparts.c...cat=314&page=2 |
Why not add a trim tab switch to your throttle? So you would have 2 switches on your throttle stick (drive and tabs). Easy to operate with your thumb.
|
One of the better mods , everything at your fingertips. ^^^^^
http://33outlaw.zenfolio.com/img/s2/...63826540-4.jpg |
Originally Posted by Padraig
(Post 4484518)
Hard/fast hole shots shorten your drive life. Don't do them.
Padraig |
Originally Posted by Black Baja
(Post 4484654)
Some of us have tides and shallow creeks to deal with and need to hole shot...
Padraig |
drag boats have shafts, not outdrives. also, all the force accelerating the boat is on the propshaft, straight to the trans and to the motor mounts mounted to the stringers near the center mass. not trying to tear the transom off the boat...
|
Originally Posted by SB
(Post 4484577)
|
These boats are not designed for hole shots. Go buy a jet boat or a jet ski for that. Your outdrive (especially gear floor) and drivetrain will thank you.
Trim tabs 2/3s of the way down helps planing. Then pull them up once on plane. |
| All times are GMT -5. The time now is 03:34 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.