bell housing bushings
10-05-2016, 08:52 AM
#1
Platinum Member
Platinum MemberThread Starter
iTrader: (6)
bell housing bushings
Do these press out from the bottom, they have a retaining clip in the package, the bottom hole diameter is larger than the top, and I presume they press back in from the top and rest against these clips ?
10-09-2016, 05:03 PM
#2
Platinum Member
Platinum MemberThread Starter
iTrader: (6)
Thanks for all the help, 
FYI they press out from the top, there is a lip machined in the top of the hole that the bushing rest against 
FYI they press out from the top, there is a lip machined in the top of the hole that the bushing rest against
