vintage chromoly

iTrader: (3)

Both bushed and roller john.

vintage chromoly

iTrader: (3)

Morel held a patent on bushed roller lifters until 2009.
When it ran out, ISKY "invented" the technology.

getrdunn

iTrader: (7)

Tks vc

14 apache

iTrader: (1)

Looks like they have revers bushing lifters now. The axel is the bushing. That's the way diesels are. Always has a dynamic oil wedge. Diesels have bin doing this a long time.

SB

iTrader: (1)

http://johncalliesinc.com/pdf/NPA201...ingLifters.pdf

endeavour32

iTrader: (4)

So what is your opinion on titanium intake valves? Having a much lighter intake valve has many benifits, and OEM's are using them and not having any issues. I would think as long as the heads have the right seats in them it's a great option to really lighten up the intake side of the valvetrain.

14 apache

iTrader: (1)

Titanium with a crn coating like what goes on a carbide cutter.
Can be run on a standard ductile iron seat.

HaxbySpeed

That's awesome! What series LS? LS7's? Who's valves did you use in those builds, and what other valve train mods? Whose exhaust and front accessories? Got any pics? I like the LS platform, not very common and cool to see. What was the name of your shop again?

Black Baja

iTrader: (2)

These were 427 Katech Motors. They ran 1 24hr endurance race. The cams, dry sumps and injections were removed. Intakes, carbs wet sumps and cams from another big LS builder were added. And went in the boat. We actually have two boats running around here with these same motors in them. The two with 900hrs have had more abuse and owner neglect than any other boat motors I have ever seen. I honestly don't know or can comprehend how they have stayed together. One motor has been overheated probably half a dozen times for various reasons. Mainly stupidity and neglect. They are aluminum blocks with aluminum heads. How do they stay together? I don't know...

It's not my shop. And whom I work or have worked for is really none of your business. Do you have some sort of problem with me?

HaxbySpeed

That's awesome, you don't see a lot of guys doing LS marine stuff. I was just curios where you were building and installing all these cool projects, when you say "we" I just assumed it was your shop. I have no problem with you at all. Would love to see some pics of either LS install if you ever get a chance, as long as it's not some proprietary hardware you can't share. I'm doing a few right now and always like to look for new ideas. Thanks