is anyone looking for a lathem setup
 

thought i saw someone looking for a steering sys. in this forum. if any interested i have several i am getting rid of (single , double , and outboard )

I need rams for 2 outboards, what do you have??

WHAT IS YOUR PRICE ON TWIN SET-UP.

mee too. twin bravo

I am looking for a latham tie bar that bolts on to the brackets where the rams are attached, do you have any?

Looking for twin alpha set up

single bravo e-mail me. [email protected]

Twin TRS...what do you have?;) :confused:

outboard setup ( ted )
 

ted , what all do you want ? tilt tubes , tie bars , wing plates . call me at 386 405 1700 if you want , ricky

att. formula31
 

are you tying this on to your existing sys. ? if so you want the end caps , tie bar , cylnders , trans. mounts , thru hull fittings , and which hoses ? call or post back , ricky

att. pudder fokker
 

same quest. as to formula31 . you just need everything from trans. back or what , ricky

I have tilt tube mounts and wing plates, just need the hydraulic rams for 2 V8 outboards. I also need a tie bar, but the motors aren't rigged yet so I don't know length. I could also use a set of 20 foot hoses if you have them.

right now i have totally stock steering so i woudl need everything to setup external steering. Single ram would be fine, if its cheap dual ram would work too (plus it looks cool as hell)

All I have right now is stock steering with saddle external tie bar. I have machine shop at my disposal so I can make alot of the stuff if I need to but if the price is right.

puder ...............are you just tying it into a stock power steering pump on your motor ? call 386 238 0737 be home all night if that would be easier............. ricky

Ive got a 1 year old full hydraulic helm single ram bravo 1 WPM set up I just took off of my old boat and I'm going to sell it because my new boat has an imco system on it. I could email pictures if there is any interest. I bought it thru the board here. Greg 815-218-1603

tunnelvision do you have any steering sys. left? i need one for a twin bravo, prefferably new if you have one.

still have em' . you need everything ?

Greg how much do you need for it? Can you send a photo? Thanks Charlie [email protected]

I would be interested in a full hydraulic system for twin bravos. Has to be center mounting for the cylinders.

naantele
 

you should have everthing monday . let me know how it goes .please send back my bleeder asap. ricky

tinker boater, you can mount them inside or outside . let me know what you need. down to about 4 sets ..........ricky

Tunnelvison ... how much for a twin TRS setup complete.. 83 SCARAB -III TRS STOCK STEERING....Dave

Tunnelvision, got everything yesterday almost got it all put on. LOOKS GREAT!!!
Thanks naantele

Tunnelvision, Forgot to ask a friend wants to know if you have another Twin- Bravo setup. Please E-mail me.

Thanks

naan.
 

sounds like u got it handled. it's not that big of a deal once you get started(plus the $$$$$$$$$ you saved not paying that marina to put it on . tell your bud i still have some left . looks like he might want you to help!!! -- ricky ----------.:p :p :D

Ive got a 1 year old full hydraulic helm single ram bravo 1 WPM set up I just took off of my old boat and I'm going to sell it because my new boat has an imco system on it. Retail is $2477 I paid 16-$1700 1200 plus shipping. Its a good buy. Might be able to do visa/mastercard. I can email pictures.Greg 815-218-1603

att; ART
 

pix.'s of some of the parts are in a thread titled "who sells latham" started by too old on 9/04/02. i used oso's search and just looked up "latham"

Hello
Need conplete for single bravo 1
Thanks
[email protected]

HP,
I'm interested in your WPM setup for my boat. It's full hydro to the helm, correct? What type of boat/ drive was it on? Was it in salt or fresh? Send pictures to [email protected].

Thanks
Luxy

?'s on the lathams
 

a couple of people e-mailed before i went out of town w/work. we had stay a few extra weeks in joliet, and the mes. were deleted. still have a lot of the latham equip. (about everything) back home now if any ?'s

tunnelvision
 

I have full latham steering BUT adding ext.boxes and looking for wing plates. Not sure if I will go with transom extender,imco brackets or what . Just wanted to know if you have any wing plates etc.Thanks

have quite a few sets of bravo end caps, but i think there's a set of the new style plates there too. i'll check in the a.m. and let you know.

full hydraulic helm to rams - dual ram Twin bravo setup - email prices to:

[email protected]

I have two apllications I would like pricing for.

1)Stock single bravo - price for single assist
- full hydraulic

2)Stock single alpha ss - price for single assist

Thanks

[email protected]

Tunnel vision- I left you a voice mail and an email last night....
call/email me:cool: