installing imco +3 box, dropped
 

i've seen it talked about here on oso, just wondering if anyone has done it, and what if any tricks or tips you could pass along.

friends boat, prop shaft is at 4 5/16 approx. stock lower,

or if any one wants to trade a 3 inch box for a nuetral box. (rather have a nuetral)

thanks

edit in single 24x7

I started a thread on 24x7 X dimension a few years back, got some good info..
http://www.offshoreonly.com/forums/d...sion-24x7.html

I went with 18.5" X on my 26x7 Corsa... ran GREAT !

FYI,, a Bravo drive is 21 13/16" from shaft c-c so in my case the propshaft is 3.31" below the bottom...