Offshoreonly.com - Need slightly taller 502 valve covers...

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Need slightly taller 502 valve covers... (https://www.offshoreonly.com/forums/general-q/344472-need-slightly-taller-502-valve-covers.html)

92cobalt243

02-05-2017 01:44 PM

Need slightly taller 502 valve covers...

New Scorpion Marine Endurance Roller Rockers
#4014 need an additional 1/4" or so clearance and rather not make it happen with modifying &/or gasket bunching. Does Chevy make a 502 valve cover that clears these rocker arms? Don't have to be anything special just need 3 holes & fit the Gen VI heads, EMI Thunder Exhaust w' stock aluminum risers if it'll matter. Thanks.

Baja Rooster

02-05-2017 04:43 PM

I went with the Hardin valve covers fwiw.

92cobalt243

02-05-2017 05:05 PM

Quote:

Originally Posted by Baja Rooster (Post 4526224)

I went with the Hardin valve covers fwiw.

That's what I just ordered w/ CP Performance...3 hole polished and stainless hardware. I placed the order so I can watch the super bowl ��

92cobalt243

02-09-2017 08:40 PM

What was I thinkin'...Now that I have beautiful valve covers with 2 extra holes for breathers (I had the two 3/4" vent fittings & 5/8" tubes to the flame arrestor), are my only/best options to get breathers? Pros/Cons? I do have a new K&N flame arrestor w\ optional tube adapters. Has to be a grommet that transitions from the machined holes.

Baja Rooster

02-10-2017 12:45 AM

I just got the kit that included the breathers and deleted the pcv set up.

ezstriper

02-10-2017 08:29 AM

they make some extra thick gaskets or glue 2 together

All times are GMT -5. The time now is 10:17 AM.