Not at shop and cant figure out how the fuk to get pictures off my dying note 4 onto my new one so I took a fkng pic of the picture on old phone! intake plenum after I touched it up, it was probably better before but you can see its no where as nasty looking as the procomp tim posted, Dam!

I like that we've touched 675hp, with a 8.5:1 540 platform with a chinaman intake. And a cam that was intended to be used with a blower.

me too, gives me some hope.... I think... haha

Steve, when it comes time to try different cams, you going to try a solid roller profile, or stick with the hyd stick with solid lifters ?

The two things helping is the most badass 4150 carb known to man and absolutely killer heads plus norm tuning on the carb. Just think if you could get the head guy from one of the best carb shops in US to come to your dyno session and personally make changes!! It took 3n hours and 10+ pulls to get this pig from the 630's to 650's with this dominator, makes no sense!! Im throwing a post up on FB to my local peeps to try to find a carb spacer for tommorrrow!

Looks don't tell you the whole story. Didn't your Mom tell you that growing up ? :)

lol

Steve, I am back from vacation, I could send my carb if you still want to try it, text me ..

Smitty, what type of carb spacer you need/want? I can 3D print you up 1", 2", 3" or4"+.

Im moving on to efi after i get everythi g out of this that it can make, probably sometimes next week. If you can send me your carb and FA this week ill test it before moving on. You can find my address on our fb business page smittyseng or on our website contact page : smittysengtrans.com