Offshoreonly.com - Prop shaft depth

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Prop shaft depth (https://www.offshoreonly.com/forums/general-q/346333-prop-shaft-depth.html)

mggdoors

04-19-2017 04:34 PM

Prop shaft depth

What is the general rule gor propshaft depth on twins. Is it measured directly below outdrive or below the pad or "v" in the center of the boat.

dereknkathy

04-19-2017 05:23 PM

I believe you put a straight edge on hull so it hits the bullet of the drive and measure down from there.

All times are GMT -5. The time now is 12:49 PM.