|
Looks like its going to be a 555 the block had been punched already
|
Originally Posted by Jamsf1984
(Post 4554251)
I got a recommendtion from jones cam designs a 242/245 @50 with 640ish lift on a 114lsa with afr 290 how do you guys feel about that
|
Thats close to the grind I was running in the 540's with a afr 305 head, they made good power
|
F2 speedy where were u proping with that cam for rpm, i have 305 cnc heads on the way im debating sending the marine kinetics cam i have back to cam motion they said it can be streched to 239ish/242ish 640 650 lifr on 114 regrind is 200 vs more to do a whole new cam what do you think
|
33 Outlaw 7800 lbs boat 28p 4 blade bravo....5200 625hp
|
Originally Posted by F-2 Speedy
(Post 4554609)
33 Outlaw 7800 lbs boat 28p 4 blade bravo....5200 625hp
|
Originally Posted by endeavour32
(Post 4554682)
What kind of speeds are you getting with that power in a 33 Outlaw?
|
Nice, im hoping to see 80mph with this 25 outlaw with the new motor
|
540 build
Just recently finished dyno on my 2 540 motors. very happy with the results. contact Bob M. at Marine Kinetics, he can point you in the right direction. Thanks Bob for your cams and advice to put together my builds. AFR 325 heads, 9.75 compression, Nickerson 4150 carbs, 681HP at 5720rpm.
|
What was the cam selection?
|
| All times are GMT -5. The time now is 12:31 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.