![]() |
Rinda Techmate Pro
Hi all,
Was wondering if the Techmate Pro can also monitor engine functions such as IAT, oil pressure, voltage etc. Not sure by looking to the info they have on their website..and have not found time to call them. Thanks |
Originally Posted by Revspan
(Post 4553557)
Hi all,
Was wondering if the Techmate Pro can also monitor engine functions such as IAT, oil pressure, voltage etc. Not sure by looking to the info they have on their website..and have not found time to call them. Thanks |
cool. Last question, I have the network installed to run my Garmin and monitor some limited engine information. Can I connect to this same network to gather information. I could then do this near the helm, and for both engines at one time(one connection). Engines are SBC, 6.2 ECT(catalyst) engines...2014.
Thanks!!! |
Originally Posted by Revspan
(Post 4553565)
cool. Last question, I have the network installed to run my Garmin and monitor some limited engine information. Can I connect to this same network to gather information. I could then do this near the helm, and for both engines at one time(one connection). Engines are SBC, 6.2 ECT(catalyst) engines...2014.
Thanks!!! |
the correct CAN adaptor and Diacom has them as well - It is not the same port as the DLC for the scan tool itself. The adaption has been in the mix for years.
|
Techmate pro has a lot of new features. In the 2021
|
| All times are GMT -5. The time now is 11:49 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.