|
Originally Posted by NCDS2000
(Post 4572395)
Every boat is different I would bring some quality rtv that's chemical resistant at the very least. That way if you need to reseal it temporary you can. the boat i was working on didn't have a screen on the one side pick up and that was the side I was having issues. I had to fabricate new screens for both sides and clean out the tank.
|
Not sure on the fountains and i own a fountain, but never looked at mine I know my sending unit screws into the top of the tank because mine doesn't work anymore. I installed a fuel monitoring system with is way more accurate 99.5 percent to be exact and the system tells me way more info gph, total fuel used , has a reset for current fuel used. My tank is a 120 gallon tank and I know not to burn more than 80 gallons before refueling because fountains tend to not run well at a quarter tank or less. Mine anyway lol.
|
Originally Posted by FREAKY FAST
(Post 4572397)
Got it. How do the pick ups remove from the top of the tank? Are there just a few screws or whatever and it just pulls right out/straight up?
|
| All times are GMT -5. The time now is 05:11 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.