Oil cooler
Will the oil cooler from a hp500 work on a 555ci motor?
|
Run it and see what you're oil temps are. I'm guessing no , but I'm no professional ,
|
Capacity of oil pan makes a difference in that question
|
I'm no expert, but anytime you start going above stock performance I'd suggest going with a bigger cooler with a thermostat and new lines. The stock stuff is barely adequate as is.
|
8 quart pan
|
Is anyone using a 2x18 cooler on a larger ci motor?
|
My Paul Pfaff 565's have 2" coolers on them, but my oil temp is a little higher than I like after a hard run. If I were doing it, I would upgrade to a 3" cooler with -10 or 12 lines. You won't be sorry
|
I would say no to cooler, lines, and adapters, very restrictive
|
|
I have you answer yesterday lol (3x18") good for 700 HP.
|
All times are GMT -5. The time now is 01:42 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.