|
Timing mark on 502 on balancer
there is no timing tape just a mark does anyone know how much timing that gives you
|
thats suppose to be tdc.
|
Not knowing which 502 but figuring it should be 8 BTDC
|
Interesting, my Gen VI 502 engines have numbers on balancers.
|
Gen 6 2000 502 mag mpi
redid the now a 509 with a carb |
Using a msd setup with box 📦
|
the line on the balancer is tdc when lined up with the timing tang,you need a timing lite with advance knob to check actuial timing.
|
Either advance light or timing tape (If the marks have not been painted over)
JEGS Performance Products 40725: Timing Tape for Pontiac with 5.25" Balancer | JEGS |
you can buy timing tape. Also you have to buy the correct timing tape that matches the size of your harmonic balancer
|
The mark on the balancer is ( top dead center ) 0.00 degrees
|
Originally Posted by GENECYCLEBOY
(Post 4938999)
The mark on the balancer is ( top dead center ) 0.00 degrees
|
Originally Posted by sutphen 30
(Post 4576247)
thats suppose to be tdc.
|
Originally Posted by DrFeelgood
(Post 4939002)
It's been 8 years, I think the OP figured it out by now. And he's probably not coming back.
|
Originally Posted by DrFeelgood
(Post 4939002)
It's been 8 years, I think the OP figured it out by now. And he's probably not coming back.
|
| All times are GMT -5. The time now is 03:52 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.