Notices

Eddie Young

Thread Tools
 
Old 09-12-2017, 11:07 AM
  #1  
dcb
Registered
Platinum Member
Thread Starter
 
Join Date: Aug 2007
Location: Falmouth, Va/ PGI, Fl
Posts: 448
Received 3 Likes on 2 Posts
Default Eddie Young

Called Mr. Young today looking for an aftermarket part number for an IAC for a 525EFI. He took the time to call me back with 2 different part numbers - really appreciate the help. Thanks again ! Dean
dcb is offline  
Old 09-12-2017, 11:55 AM
  #2  
Platinum Member
Platinum Member
iTrader: (5)
 
adk61's Avatar
 
Join Date: Nov 2005
Location: Toronto, Canada
Posts: 2,399
Received 14 Likes on 10 Posts
Default

Eddie is a stand up guy... always takes the time to give great advise!!
adk61 is offline  
Old 09-12-2017, 12:42 PM
  #3  
Registered
 
Join Date: Oct 2000
Location: Lakewood, NY, USA
Posts: 3,482
Received 317 Likes on 174 Posts
Default

Originally Posted by dcb
Called Mr. Young today looking for an aftermarket part number for an IAC for a 525EFI. He took the time to call me back with 2 different part numbers - really appreciate the help. Thanks again ! Dean
It was things like this that made me go to Eddie for my rebuild and will someday go back when needed. Great guy to work with and a great engine builder.

Padraig
Padraig is offline  
Old 09-12-2017, 12:51 PM
  #4  
Registered
iTrader: (1)
 
Join Date: Jun 2011
Location: Henderson, KY
Posts: 2,167
Received 80 Likes on 56 Posts
Default

So did he give you a different pn than the one that has been posted on OSO in the past? If so, please share.

And Eddie IS a good dude!
ALL_IN! is offline  
Old 09-12-2017, 12:55 PM
  #5  
dcb
Registered
Platinum Member
Thread Starter
 
Join Date: Aug 2007
Location: Falmouth, Va/ PGI, Fl
Posts: 448
Received 3 Likes on 2 Posts
Default

Sorry - NAPA part number 2-29691 and Borg Warner 31069. I believe the application is for a 2000 - 2005 6.8 V10 Ford.
dcb is offline  
Old 09-12-2017, 02:28 PM
  #6  
Registered
 
Join Date: Feb 2012
Location: westville, NJ
Posts: 4,031
Likes: 0
Received 10 Likes on 8 Posts
Default

I heard it was a Windstar IAC. Either way Ford is cheaper than Mercury... And when somebody saves us a C-note on simple stuff we remember when it is time to spend a bunch of them...

Last edited by dereknkathy; 09-12-2017 at 02:31 PM.
dereknkathy is offline  
Old 09-12-2017, 06:53 PM
  #7  
SB
Registered
iTrader: (1)
 
Join Date: Nov 2004
Location: On A Dirt Floor
Posts: 13,545
Received 3,115 Likes on 1,402 Posts
Default

Originally Posted by dcb
Sorry - NAPA part number 2-29691 and Borg Warner 31069. I believe the application is for a 2000 - 2005 6.8 V10 Ford.
Yes #229691 .
Buyers Guide
Ford Truck E Super Duty 1997 - 1998
Ford Truck E350 1 Ton Econoline - Van 1997 - 1998
Ford Truck E350 1 Ton Econoline Club Wagon 1997 - 1999
Ford Truck E350 Super Duty 1 Ton 1999 - 2004
Ford Truck E450 Super Duty 1 1/2 Ton 1999 - 2004
Ford Truck E550 Super Duty 2002 - 2003
Ford Truck Excursion2000 - 2005
Ford Truck F250 Super Duty 3/4 Ton - Pickup 1999 - 2004
Ford Truck F350 Super Duty 1 Ton - Pickup 1999 - 2004
Ford Truck F450 Super Duty 1 1/2 Ton Truck 1999 - 2004
Ford Truck F550 Super Duty 1999 - 2004


Last edited by SB; 09-12-2017 at 06:59 PM.
SB is offline  
Old 09-12-2017, 07:05 PM
  #8  
SB
Registered
iTrader: (1)
 
Join Date: Nov 2004
Location: On A Dirt Floor
Posts: 13,545
Received 3,115 Likes on 1,402 Posts
Default

$60.68 Amazon
Motorcraft CX1870 Idle Air Control Motor

by Motorcraft
Link: http://a.co/2j7eTnt

or

$48.78 Amazon
Delphi CV10135 Idle Air Control Valve

by Delphi
Link: http://a.co/jfm5qkV


Last edited by SB; 09-12-2017 at 07:19 PM.
SB is offline  
Old 09-12-2017, 07:46 PM
  #9  
BUP
Banned
iTrader: (9)
 
Join Date: Jul 2011
Location: Ft. Worth TX
Posts: 9,594
Likes: 0
Received 41 Likes on 35 Posts
Default

Above post from SB do not use that gasket - you will need to buy the Merc gasket. I had one last year that the owner installed the exact same gasket with his aftermarket IAC on a 525 - Again It was the exact same gasket in the pic above --- To make long story short so here is the short version --- the engine did not like it. period.

Also Merc calls that IAC above Design 1 or gen 1 --- the Design II comes with a pig tail connection - just saying - make sure your connection / connector is good - Had those bad as well.

Last edited by BUP; 09-12-2017 at 08:04 PM.
BUP is offline  
Old 09-12-2017, 07:53 PM
  #10  
SB
Registered
iTrader: (1)
 
Join Date: Nov 2004
Location: On A Dirt Floor
Posts: 13,545
Received 3,115 Likes on 1,402 Posts
Default

This one right ?

Motorcraft CG763 Gasket
by Motorcraft
Link: http://a.co/hosctTs

SB is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.