VDO volt meter
 

MyVDO volt meter doesn`t work right ca these be repaired?
The new gauges don`t match I think there blue line.

Limey'
Sure it's the gauge that's bad. I have two VDO vm's in mine and both were off (low) like under 12v . Batteries were 13.4v engines running. Had 13.4 on back of ignition switches. Measures the volts across the terminals on the meters and they were reading exactly what they were seeing. Found a bad connection on ground side of guages.

Check on ebay, I see a lot of them on there.

Back of terminals check 14.4. The gauge shows 10.5.

That's measuring right across the two terminals on the gauge , right? Not gauge to ground ,right? If that's the case then that sucker's bad.

VDO guages can be repaired I had my done.give me a call at 770-920-1444 and I will give you the name and number of the place that does it.I have to dig it up.
Mark

the VDO Blue line do match the looks/graphics of the original guages except for being newer (they will be white instead of slightly yellowed letters) they are increasingly hard to find tho basically discontinued you have to find one on the shelf. The Vanguard VDO line looks very similar, has the same square bezel but the graphics and pointer are very slightly different, I bot one of these for an oil temp guage and it sticks out more because it looks newer than because of the slightly dif graphics, ( mainly the icon showing guage type is at the lower right instead of the lower center of the guage.

I am not endorsing this vender ( I've just never used them) but this site .Eguages has pictures of both blueline and vanguard lines.

New Vanguard.......................................Old Blueline

Lime Disease
Go to www.VDONA.com and they will have repair facilities listed in the site.
Fishead

I must not have blue line. They have a Blue line in a arc under the numbers.