Offshoreonly.com - cam specs on an 87 350 mag

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - cam specs on an 87 350 mag (https://www.offshoreonly.com/forums/general-q/35322-cam-specs-87-350-mag.html)

cam specs on an 87 350 mag

Anyone know the specs?

What about a good aftermarket for stock 350 mags?

Thanks

Jason

According to Dennis Moore the stock cam(s) are:

Mercury p/n 431-5943 non-roller type
GM p/n 340284
Duration @ .050 200I/212E
Lift @ .050 .400I/.410E
Lobe C.L. 108*ATDC/112*BTDC
Lobe seperation 110*

Mercury p/n 431-811658 roller cam
Duration @ .050 197I/207E
Lift @ .050 .430I/.450E
Lobe C.L. 106*ATDC/112*BTDC
Lobe seperation 109*

It depends on when your engine was made as which cam you have. Mine was made in late '87/early '88 and it's a non-roller. Sometime in '88, maybe early '89, they switched to a roller cam.