Xm270hr cam questions
I am going to start building a 358 with vortec heads and i wanna use the comp xm270hr cam. I have stock manifolds with 3 inch plates and stock risers .and side exit throuh hull thats 4 inch all the way. Has anyone had any reversion problems with this cam . I belive the 3 inch riser plates will help immensely to prevent it . Comp says i shouldn't have an issue . Looking for input
|
I run a x4270hr in my 350mag no problems! The xm270hr has to much lift for a stock Vortec head shock vortec head has a .474 max lift Otherwise you’ll hit your valves Seat |
I run a Crower roller cam that's a bit bigger with no issues. If using Vortec heads have them set up for lift clearance as mentioned above.
|
i run xm270hr with no issues mercruiser manifolds and risers thru hulls i used valve springs from Alex's parts
|
All times are GMT -5. The time now is 06:35 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.