|
time to step up to the plate
well after many years of reading. ive decided to giveit a shot , pulling a motor to change coupler . probly just move engine forward , question is , can I use strap off intake on fully dressed motor , thought about going under whole intake and lifting , but not sure about that either . what you guys think.. thanks again rob
|
Does the engine have lifting eyes? If so, that’s what I use. You can run a bolt into the front of the head. There’s several ways to do it |
Originally Posted by endeavor1
(Post 4633446)
Does the engine have lifting eyes? If so, that’s what I use. You can run a bolt into the front of the head. There’s several ways to do it |
1 Attachment(s)
|
Just buy lifting plates and screw them on the two adjecent corners. Use grade 8 bolts if you are nervous. They are only like $30
|
Lifting plate bolted to the carb bolts with a harbor freight 1/2ton chain hoist worked like a champ for me. If you have an airgap intake just run a strap through it. |
https://cimg6.ibsrv.net/gimg/www.off...c1e75c763.jpeg I also found electric towers to be a useful gantry, lol. |
Wtf |
Originally Posted by getrdunn
(Post 4633474)
Wtf Must work for the local electric power company is all I can think off. Glad its grounded. If not that Baja would be going Baba the tower even has a warning sign on it . Prob says WARNING HIGH VOLTAGE STAY 3000 FT AWAY. |
Have a bunch of these and drilled out for all different hole patterns Just one example in the pic -- Works for many apps https://cimg5.ibsrv.net/gimg/www.off...f68a830825.jpg
|
| All times are GMT -5. The time now is 08:06 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.