warlocky

I have a warlock 25 sxt with a carb 502.i have to much water presure.I put 2 dumps off the rear of the intake with values to controll the flow but the motor dosnt get enough water to the thermostate.where is the best place to put my dumps.Thanks.

Griff

Put an adjustable pressure relief valve in the main water supply hose.

payuppsucker

warlocky

Wher did you get them and where do you install them at.

payuppsucker

Hardin Marine or CP Performance. I prefer to put them in the hose that goes from the oil cooler to the motor so you get full flow through the oil cooler.

SB

iTrader: (1)

Smart.
Merc racing suggests to put there's and all water psi regulators after the oil cooler but before the block..

vintage chromoly

iTrader: (3)

GPM

Did you always have to much pressure or is something restricting the exit path of the water, block or exhaust manifolds full of rust or dirt.

payuppsucker

vintage chromoly

iTrader: (3)