Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Has anyone pro-charged a 350 Mag MPI? (https://www.offshoreonly.com/forums/general-q/356231-has-anyone-pro-charged-350-mag-mpi.html)

Franks292 08-23-2018 10:12 AM

Has anyone pro-charged a 350 Mag MPI?
 
Just curious if anyone has ever done it. I saw the kits on cpperformance. I have an 02 Formula 292 with twins and I would really like to see 80mph. Any suggestions welcome!

axm0z5h 08-23-2018 10:48 AM

i would worry about longevity.

Blueabyss 08-23-2018 10:51 AM

Nothing better than spending other peoples money.. I say go for it.

Chris

COOPS 08-23-2018 12:46 PM

LS swap and sell your current package.

scarabman 08-23-2018 01:36 PM

If you were to go the huffer route, I would suggest Whipple over ProCharger. You would likely have less set up headaches that way.

Paxtonspeed 08-23-2018 01:41 PM

Stock cast internals won't like it for very long.

EBT531 08-24-2018 02:59 PM

If you have cast internals, keep the boost down or it wont last long. I've run prochargers in cars with hypo pistons etc. for years without issues keeping boost under 8psi and using an intercooler

SB 08-24-2018 04:11 PM

Not the same as marine:ie always under load / slower rpm acceleration / and etc

OP - do a search under FTMMarine / Bob LLoyd. i think he's done a few.

motuman 09-26-2018 02:35 PM

I was looking into that a while back.

Young Performance Marine said they had good luck supercharging the 350 MAG MPI. Maybe check with them?


All times are GMT -5. The time now is 11:36 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.