Offshoreonly.com - KE Headers on 525 EFI

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - KE Headers on 525 EFI (https://www.offshoreonly.com/forums/general-q/357757-ke-headers-525-efi.html)

Quote:

Originally Posted by SB (Post 4660395)

Endeavor32: Make the beginning of the KE/Diamond tails to the end of the tips 18"-20". 19.5" is ideal. Your welcome. :)

---- Collector's Harmonics (includes Intermediate, Muffler , TailPipe) ----
1st Harmonic = 155.2 inches long ... longest with Mufflers and TailPipes
Note: Worst = 116.4 inches long for HP/TQ Loss
2nd Harmonic = 77.6 inches long ... longest recommended with Mufflers
Note: Worst = 58.2 inches long for HP/TQ Loss
3rd Harmonic = 38.8 inches long ... more bottom-end Torque
Note: Worst = 29.1 inches long for HP/TQ Loss
4th Harmonic = 19.4 inches long ... highly recommended , best Torque Curve
5th Harmonic = 9.7 inches long ... reduced Torque , more top-end HP sometimes
6th Harmonic = 4.9 inches long ... reduced Torque , not recommended

Thanks SB!

Quote:

Originally Posted by endeavour32 (Post 4660343)

Bill-

Those would sure look nice painted silver and attached to my engines!

OK, if you are going with those headers, paint mod required:

2 square tubes blue, 2 square tubes silver.
Alternating on each header to match the flip flop of the paint on each side!

Its winter, ya got time! :D
(You will be 1 of 1 if you do it!)

Ha- I don’t know if I’ll go that crazy, but I was thinking about one set merc blue, the other set silver!

Either way way I think we are on the same page!