525efi Reversion??
#11
Registered
Thread Starter
I am not sure about the reason why, but that was the feedback from Jerry with Stainless Marine. A leak at the top riser joint will make reversion worse.
#12
Registered
Thread Starter
Griff we were on the trailer, I do agree that the angle in the water would make the riser angle steeper and most likely drain better. I plan to run it as soon as the weather cooperates and see how it does.
#14
Registered
Thread Starter
Update I was able to run the boat today, I put about an hour on it. After running I Idled for about 5 minutes then Pulled the riser, it was dry. Griff. I did notice the boat leans to the back more in the water than on the trailer that could lead to the riser draining slower than in the water too.
#15
Platinum Member
Platinum Member
Update I was able to run the boat today, I put about an hour on it. After running I Idled for about 5 minutes then Pulled the riser, it was dry. Griff. I did notice the boat leans to the back more in the water than on the trailer that could lead to the riser draining slower than in the water too.
I'm thinking of doing this to my 525efi's? thanks