Offshoreonly.com - Merctrans pilot bushing

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Merctrans pilot bushing (https://www.offshoreonly.com/forums/general-q/358142-merctrans-pilot-bushing.html)

jg480

12-17-2018 07:17 AM

Merctrans pilot bushing

Does anyone have a part number for the pilot bushing for the Merctrans II. I need 2 for 1 piece rms small blocks.
Thanks!

getrdunn

12-17-2018 03:05 PM

Quote:

Originally Posted by jg480 (Post 4664141)

Does anyone have a part number for the pilot bushing for the Merctrans II. I need 2 for 1 piece rms small blocks.
Thanks!

I pulled two out a couple years ago and looked like a std GM pilot bearings. Auto parts store should have. If you don't get a part number just measure inner diameter of your crank and outer of your shaft and ck with Napa etc.

jg480

12-17-2018 04:15 PM

thanks I have the old ones from the 2 piece blocks, not sure if they will fit the new 1 piece.

getrdunn

12-17-2018 05:45 PM

I believe the will.

BillK

12-17-2018 07:58 PM

Quote:

Originally Posted by jg480 (Post 4664212)

thanks I have the old ones from the 2 piece blocks, not sure if they will fit the new 1 piece.

Yes, they are the same.

All times are GMT -5. The time now is 05:27 PM.