Offshoreonly.com - 7.4 mpi timing issues

Page 3 of 3

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - 7.4 mpi timing issues (https://www.offshoreonly.com/forums/general-q/359670-7-4-mpi-timing-issues.html)

Cap'm Kurt

03-25-2019 06:42 PM

FYI, here is the timing chart vs manifold pressure for 454 mpi mag. Not a lot of timing.

https://cimg1.ibsrv.net/gimg/www.off...802666323d.jpg

troc	03-26-2019 08:24 AM

Quote:

Originally Posted by Cap'm Kurt (Post 4678679)

FYI, here is the timing chart vs manifold pressure for 454 mpi mag. Not a lot of timing.

https://cimg1.ibsrv.net/gimg/www.off...802666323d.jpg

That is great thank you ! I will be dynoing this week Looking at inputs at ECM that control timing I will report back thanks again to all

tbanzer

03-26-2019 02:14 PM

Try another Ignition Module. A known good one if possible!

troc	03-27-2019 06:21 PM

Quote:

Originally Posted by tbanzer (Post 4678833)

Try another Ignition Module. A known good one if possible!

Did that , same timing curve

All times are GMT -5. The time now is 02:19 PM.

Page 3 of 3