Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Eddie Marine exhaust flap rattle (https://www.offshoreonly.com/forums/general-q/359820-eddie-marine-exhaust-flap-rattle.html)

Joey805 03-28-2019 09:06 PM

Eddie Marine exhaust flap rattle
 
Hey all - I have a 2004 Lightning 21 XS with a 350 Mag MPI and through transom exhaust. On the starboard side the flap inside the pipe is rattling like crazy when the motor is at idle. If I reach inside the exhaust and wedge the flap so it's stuck open, the noise is gone. Port side is not stuck open but not making any noise. I do have internal flaps as well as rubber flaps on the outside. What can be done about this noise? Here are a couple pics of it.


Edit: Apparently I am not allowed to post any pictures on this forum until I have at least 10 posts.

thirdchildhood 03-29-2019 06:22 AM

Mine rattle too.

Joey805 03-29-2019 02:52 PM

Is there a better tip to replace them with that wont rattle like this?

ccrder1 03-29-2019 04:10 PM

I've used the Dana Marine tips on past boats. Really nice tips and their internal flappers do not rattle. And the flappers are bolted in so you can replace them however.... I went to order a new set a coupe months ago and found out Dana marine is no longer around. I think one of his partners or employees took it over. Now called Marine Industries West. I placed the order online and got a phone call a month later stating they were on back order. I called a couple months later and they said no stock still. after another month I gave up and bought a set of Eddie Marine.

Baja Rooster 03-29-2019 04:25 PM

I put in Hardin tips with rubber flaps inside and it sounded like someone dumped ball bearings into the engine. I took those out and just use the external rubber flaps


All times are GMT -5. The time now is 12:17 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.