Originally Posted by BUP (Post 4720469)

Thanks --- You are more than welcome to call me if you like.


A tip for the 496 OEM stock wires is they need to be changed out at some point in time because the boots at the spark plugs do not hold up down the road. Voltage / spark leaks thru the boots and or splits the boot. This can cause PCM 555 failure. NO bull cause I see this from PCM repair. I see this a lot currently with 496 engines using 14 and older spark plug wires. Anyways wanted to pass that along. Also Taylor wires are not a good choice for any 496 marine engine actually I would not use them for any Marine efi engine.



if need contact


eight

one

7


six

five

8


seven

seven

two

1


Thanks as well.

Originally Posted by 04Pachanga26 (Post 4754231)

BUP, I sent you a text to that number. No reply. I think I need some wires if you’re still selling. Let me know when you get a chance. Thank you!

Originally Posted by Keith Atlanta (Post 4754356)

Holy ship. For $300 did they get you 5 miles per hour?

Originally Posted by SB (Post 4754360)

The Mercs are about the same, so MSD said let’s do it too. Lolol

If you guys do a search here, some years back we found another marine company that sold them, same as metc OE for a little over $100.