Offshoreonly.com - Bravo One Replacement Advice

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Bravo One Replacement Advice (https://www.offshoreonly.com/forums/general-q/360345-bravo-one-replacement-advice.html)

Jutter85

04-28-2019 03:10 AM

Bravo One Replacement Advice

Hello, I am looking to replace my Bravo One transom assembly and outdrive on my 2005 Baja H2X completely.
My concern or question is are there minor differences between older Bravo Ones and new Bravo ones or are they a direct and exact replacement, especially with regard to all the connections to the drive.
I want to make sure the drive I buy is the correct one from the start. I will need a 1.5 ratio.
Please let me know of anything I should be aware of.
Thanks in advance!

JaayTeee

04-28-2019 06:46 AM

What engine is in the boat ?

AllDodge

04-28-2019 06:48 AM

Look for any after 1995 and your good.

Jutter85

04-28-2019 07:19 AM

Quote:

Originally Posted by JaayTeee (Post 4684220)

What engine is in the boat ?

496 Mag

Jutter85

04-28-2019 07:20 AM

Quote:

Originally Posted by AllDodge (Post 4684221)

Look for any after 1995 and your good.

Great, Thanks!

JaayTeee

04-28-2019 11:07 AM

https://www.mercruiserparts.com/6315...rtcraft-transo. This is the t/a listed, depends on if the trim sender is 2 or 3 wire, a 05 496 would have most likely had a slope backed Bravo 1, anything will bolt up though, the really, really old drives won’t have a oil reservoir valve in them

All times are GMT -5. The time now is 04:08 AM.