cyrus77

iTrader: (4)

Can anyone give me some guidance on putting Safety's in the Holley HP system?

I figure for Oil pressure, temp, etc.

Thanks!

articfriends

iTrader: (1)

Up and running yet?

AusScarab29

cyrus77

iTrader: (4)

Yes

AusScarab29

AusScarab29

cyrus77

iTrader: (4)

Yes great system. Very happy. jsut want to added fail safes.

ICDEDPPL

iTrader: (1)

I haven`t gotten into the software portion but just a quick look .. isn`t it in here? somewhere ??

kvogt

That will give you a rev limit of approximately 2600 rpms. Once you pull the sticks back or input trigger clears it resets.

cyrus77

iTrader: (4)

My goal is make the engine idle/warn if
~~~
water temp exceeds 190
oil pressure less than 10 psi at idle
oil pressure less than 20 psi at 2000
oil pressure less than 30 psi at 3000
​​​​​​​oil pressure less than 40 psi above
​​​​​​knock sensor above x pull xx degrees of timing
limit RPM to 1500 is fuel pressure is below 35 psi
Limit RPM to 1500 if coolant is below 140
Warning if the voltage is less than 13V and RPM is above 500
​​​​​​​
and anything else you guys can think of, I am open to.