Offshoreonly.com - Oil Temp Sender Location

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Oil Temp Sender Location (https://www.offshoreonly.com/forums/general-q/361792-oil-temp-sender-location.html)

Scarab28

07-14-2019 12:04 PM

Oil Temp Sender Location

Gen VI Dart block - I moved my Oil Temp sender to the plug at the rear top of the motor. It's now reading low oil temp there (110). Is this a bad spot for the sender. I did read not to install it in a dead ended location.

ezstriper

07-17-2019 06:12 AM

I always ran them in the oil filter mount

sleev-les

07-17-2019 06:37 AM

Mines on the oil filter mount. Runs high though but think its the senders. When I shoot it with the temp gun its always sitting within reasonable range.

SABER28

07-17-2019 08:23 AM

you should be measuring that oil temperature in the pan , but thats not always the easiest place to get to.

F-2 Speedy

07-17-2019 08:30 AM

Quote:

Originally Posted by Scarab28 (Post 4696578)

and you put in a dead end spot, oil pressure sender is fine there, oil temp sender needs to be in the oil flow before the cooler.

All times are GMT -5. The time now is 08:51 PM.