Offshoreonly.com - COG drive help needed

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - COG drive help needed (https://www.offshoreonly.com/forums/general-q/363258-cog-drive-help-needed.html)

Cerberus66

10-04-2019 11:45 AM

COG drive help needed

I need to set up my procharger with a cog drive. Has anyone here done that with a 496 based block? I have stock serp and my charger is extended past that. So I need cog drive for my blower wiht the right offset and crank drive that will bolt up.

Any help would be appreciated.

GPM	10-04-2019 02:55 PM

Just curious, why are you running a cog drive

Cerberus66

10-04-2019 03:47 PM

Quote:

Originally Posted by GPM (Post 4709365)

Just curious, why are you running a cog drive

Advisement from Arizona Speed and Marine. if i want to step up to 10-12lbs. There have been some recent advances in belts and drives so i have bought a new gates rpm belt and pulleys to push up to 7-8lbs from barely 2.9

GPM	10-04-2019 04:21 PM

I was just curious, I could run 16 to 18psi with a 12 groove.

Cerberus66

10-04-2019 04:26 PM

Quote:

Originally Posted by GPM (Post 4709380)

I was just curious, I could run 16 to 18psi with a 12 groove.

THats great news to hear thanks a bunch. what are you running? I have a 3.4 pulley and 6.9 crank pulley

GPM	10-04-2019 04:37 PM

I was running an M-5, I think the crank pulley was 7 and I know the blower pulley was 4.5.

All times are GMT -5. The time now is 12:01 PM.