Cam choice
#1
Registered
Thread Starter
Cam choice
thinking abt a cam change what is in there now is comp cam extreme marine 284 hr... spec 230/236. 547/547 lift ..... motor spec. Are stroked 454 to a 496...9.5 to 1 comp ..heads are alum 330 runners. With 2.250/1.99 valves What would y’all recommend
#4
Registered
3/4 race cam for sure.
#6
VIP Member
VIP Member
278/288
228/238 at .050
.612/.618 lift
114 lobe separation
With a set of tie bar comp lifters....if only you could find one....
I know exactly where one is right now lol
228/238 at .050
.612/.618 lift
114 lobe separation
With a set of tie bar comp lifters....if only you could find one....
I know exactly where one is right now lol
#7
Registered
Thread Starter
#9
VIP Member
VIP Member
Comp custom grind...ran it in my motor for 8-9 hours...nothing wrong with it at all just going a little bigger
Its a flat/button nose cam
If you're interested PM me...was gonna throw it on here once I get it pulled which should be this coming Saturday.
Its a flat/button nose cam
If you're interested PM me...was gonna throw it on here once I get it pulled which should be this coming Saturday.