|
ISO 5.7 volvo penta short block
ISO 5.7 volvo penta 320hp short block or long block for a 2004 Larson cruiser. Had a winterizing issue and cracked the side of the block. JB weld fixed it but I'm looking to sell and can't do that to a buyer.. Any hook up on new or low hour(under 400) would be appreciated. Call Ken 615-604-1666 or [email protected].... Speaking of... will a similar mercruiser engine have the same roller cam/HP rating as the volvo??? It just looks like a red paint job to me, lol. THanks in advance
|
Look at a local junk yard for a late model motor. Then swap heads, brass or stainless core plugs, and swap over everything else off the VP
|
Either that or see if you can find someone with a decent standard bore block and swap all of you parts into it. Unless the heads are cracked also :(
|
| All times are GMT -5. The time now is 01:01 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.